How to: Install a new plug-and-play device.
Solution:
Install the device. Allow Windows 95 to automatically detect and set up the new device/device driver as it boots.
To install a new plug-and-play device in Windows 95:
1) Shut down Windows 95 and turn off the computer.
2) Install the new device (for example, a display adapter card).
NOTE: In most cases, hardware devices should be installed by a qualified computer technician.
CAUTION: Carefully follow ALL installation instructions given in the device's Installation or User Manual.
3) Turn on the computer and allow Windows 95 to boot. (Windows 95 should detect the new plug-and-play device.)
4) Do one of the following:
a) A driver for the new device is already installed: Wait for Windows 95 to set up the correct device driver and configure the new device to work with existing hardware and applications.
EXAMPLE: When a new PCMCIA card device is installed, the computer beeps after Windows 95 automatically installs and configures the new device.
b) A device driver is NOT installed:
1] Insert a diskette containing the correct device driver in the floppy drive when Windows 95 requests it.
2] Follow the on-screen instructions to install the new device driver.
